Nerf N-Strike Elite Jolt Blaster
About this deal
Crossfire Bow • Doublestrike • Fusefire • Jolt • Ricochet • Ripshot • Rough Cut 2x4 • SlingFire • Sidestrike With only a little bit of work you have increased the power of your Nerf Jolt by 15 feet per second from its original firing power. It really is as simple as that!
Because of this blaster’s petite size modifying the blaster might prove to be difficult. When modifying blasters as small as the Nerf Jolt, you risk damaging the blaster and its internal workings. The majority of the blaster is one solid piece of plastic, rather than two separate halves attached together with screws or tabs. The only separate pieces are the trigger mechanisms, the plunger, and a plate from which the plunger rod projects from. However, because of this blaster’s smaller size and the challenges the Nerf Jolt poses in modifications it is very popular for Nerfer’s to try to conquer the Nerf Jolt by creating successful mods.
Analysis and Test Results
There are several different versions of the Nerf N-Strike Elite Jolt but all have nearly identical inner workings Alpha Trooper CS-12 • Firestrike • RapidStrike CS-18 • Rayven CS-18 • Rayven Stinger • Rough Cut 2x4 • Spectre REV-5 • Strongarm • Stryfe • Triad EX-3 The first re-shell predates the first Jolt re-release. The Clue Elimination blaster set was released in 2012, with four unique blasters based on the Jolt's design.
The Jolt has had many re-releases with alternate color schemes. It has also been used as the basis for other blasters, which are often referred to in the community as "Jolt re-shells". Finding the correct size of sealing ring for your Nerf Jolt might prove to be rather difficult; however, creating another layer of seal with the electrical tape is effective, easy to do, and not as costly. While there are plenty of do it yourself Nerf Mods, Nerf also sells its own attachments to improve the performance of their blasters. With tons of attachments to choose from, you may not know which ones will best benefit your blaster.
However, because the Nerf Jolt is only a toy the seal on the plunger which prevents air from escaping out of the chamber when the trigger is pulled is not completely air tight. As the air escapes out of the chamber, most of your power to propel darts over a further distance disappears too!
To ensure no pieces are lost from the base plate fling off, remove the last screw slowly while applying pressure to the base. Once the screw is removed slowly decrease the pressure until the plunger system is no longer pushing against the base plate. Tactical Jolt Of note, models based on the original version of the Jolt has a screw in the plunger tube; later revisions, starting with the 2013 blue Jolt, use a nail instead. Alpha Trooper CS-18 • Barrel Break IX-2 • Barricade RV-10 • Deploy CS-6 • LongStrike CS-6 • Rapid Fire AS-20 • Spectre REV-5 • Stampede ECSWhen conquering the Nerf Jolt, it is best to start off with something easy but still effective. The SuperJolt Mod is perhaps the most popular modification for the Nerf Jolt and there are several different methods of execution. For a more in depth lesson on Nerf attachments read this article: The Best Attachments for Your Nerf Blaster: Upgrade Your Gear with These Mods!. To start this method of making the SuperJolt, all you need to do is grab the dart post with your pliers and twist! The dart post should break off fairly easily. Next, you take your screwdriver and place the tip of it down the barrel against the air restrictor. Break the air restrictor off with a few good taps and shake any extra pieces out of the barrel.