Clearwater CH0018 Lay-Z-Spa Chemical Starter Kit for Hot Tub and Spa Water Treatment (Includes Chlorine, pH Minus, pH Plus, Foam Remover and Test Strips)

Product Information

If you are going away we would suggest emptying the pool and cleaning it so the water is not left to go stagnant. Do no re-fill until you return from your trip. Chlorine demand of water too high at start up, after holidays or due to excess contamination or neglect

Chlorine levels are fluctuating, the pool has been left and gone stagnant or other chemical levels are not correct.For low TA levels below 80ppm you will need to use Total Alkalinity Increaser. The amount of TA + you need to add to your hot tub depends on the volume of water and how low your readings are. As a guide - a hot tub of 1,000 litres requires 18g to raise Total Alkalinity levels by 10ppm (parts per million). Never use unlabelled chemicals and please read the instructions before use. Avoid getting chemicals in eyes, on skin or on clothing. Avoid breathing vapours when opening a container. Avoid creation of dust. Never add water to the product. Always add product to large quantities of water. Use separate clean dry utensils for each chemical and clean after use. Do not add the product to any dispensing device containing residuals of other products. Because pH measures how acidic or alkaline your water is, it is important to make sure your hot tub ph Levels are always balanced between 7.2 and 7.6 to avoid impacting your Lay-Z-Spa and your spa experience.

For low pH levels below 7.2 you will need to use pH Plus to help raise the pH levels and balance the water.

Hot tubs, chemicals & spares

Always pre-dissolve chemicals in a clean, plastic container in a well-ventilated area. When pre-dissolving chemicals always add chemicals to water and not vice versa. Always add the chemicals to the water.