Uwell Caliburn G Coils - Pack of 4 [0.8ohm] No Nicotine Works With Caliburn G, G2, GK2, KOKO Prime, Tenet and Ironfist L Pods

Product Information

The Uwell Caliburn G is an updated version of the original Uwell Caliburn that looks similar to the original Caliburn but is actually better in every way. Like the original Caliburn, the Caliburn G is a pen-shaped pod-based vaping device with a dual-mode firing function that allows it to generate vapor when you inhale or hold the fire button. That, however, is where the similarities end because the Caliburn G features a host of improvements that make it completely unique among Uwell’s product lineup. Here are some of the Caliburn G’s most significant improvements. The 2ml Caliburn G pods keep the same simplicity as the device, with a practical top fill method providing ease of use whilst also greatly reducing the chance of leakage. Installing and replacing the Caliburn G coils is equally as easy, with two 0.8 Ohm mesh coils included and a 1.0 Ohm coil available separately. We recommend pairing both of these coils with high PG e-liquids of 50% and above for best performance.

Caliburn G coil life : r/Vaping - Reddit Caliburn G coil life : r/Vaping - Reddit

When a manufacturer releases a successful vaping device, it’s a great thing for the manufacturer and the vaping community. Almost immediately, though, everyone started asking the same question: What’s next? With pod vaping technology advancing rapidly, would it be possible for Uwell to follow up their success with another device that was a worthy successor to the original Caliburn?We’re now very excited to announce the release of the latest upgrade, Uwell’s Caliburn G, which brings a host of new improvements to an already much beloved pod vape system with the hopes of turning it into the vape of choice for thousands. Let’s take a closer look! Uwell Caliburn G review breakdown: The 0.8 Ohm and 1.2 Ohm mesh coils feature a larger surface area to heat e-liquid for enhanced flavour and vapour production, delivering a restricted DTL (Direct To Lung) inhale. The standard 1.0 Ohm coils deliver a long-lasting MTL (Mouth To Lung) vape with clear flavour throughout. A simple plug-and-play coil design allows for easy installation and removal from the pods. We recommend pairing these coils with high PG e-liquids of 50% PG and higher for best results. Now, we finally have our answer. The Uwell Caliburn G is an ideal pod vaping system in every way. In this review, we’ll walk you through the features of Uwell’s new device, and we’ll also explain the most important aspects of learning how to use it.

Uwell Caliburn G / G2 Replacement Coils | Vaping 101

The Uwell Caliburn Koko Prime pod kit is the latest iteration of the acclaimed Caliburn series. Equipped with the same compact form factor as the original Caliburn Koko, the Koko Prime is powered by a 690mAh built-in battery with a 15W max output. As well as a removable coil method, users can also configure their vape by flipping which way the pod is inserted for a customisable experience. Compatible with the Caliburn G pods and coils, the Koko Prime is ideal for vapers of all experience levels, especially those switching from smoking. Since you install the Uwell Caliburn G coil through the bottom of the pod, you’ll need to remove the pod from the device to replace the coil. Pull the pod straight up to remove it from the device. Invert the pod, and you’ll see the cylindrical atomizer coil on the bottom. Pull the current coil out and push in the replacement coil. Refill the pod and reinstall it in the Uwell Caliburn G. The Uwell Caliburn G replacement vape coils have been designed for use with the Uwell Caliburn G pod kit and the Uwell Caliburn G2 pod kit. These coils are available in three variants; a 0.8 Ohm mesh coil, a 1.0 Ohm standard MTL coil as well as a 1.2 Ohm mesh coil.Today we’ll be taking a look at the prodigal return of one of the big stars of the pod vape system scene, the Uwell Caliburn G – a unit whose predecessor changed the way a lot of us looked at pod vape systems. Expect spot-on mouth-to-lung (MTL) vaping with Caliburn G Coils (simulating the old smoke draw - drawing vapour to the mouth, holding, then inhaling to your lungs). Their high-resistance, low-wattage features ensure you get a restricted draw and allow your electronic cigarette (e-cigarette) battery to last a bit longer since they need less power to vape. Easy coil change If your chain vaping habit has to do with the fact that you are addicted to the hand-to-mouth habit of smoking/vaping, then this will be a tough habit to reduce (but you can do it).

Caliburn G Vape Kit | 2 Free E-Liquids | G Coil Compatible Uwell Caliburn G Vape Kit | 2 Free E-Liquids | G Coil Compatible

After you’ve charged the battery and filled the pod, it’s time to start vaping with the Uwell Caliburn G – and as you might expect given how simple everything else about this device, vaping is an absolute breeze. You’ve got two options here. If you’d like an experience that feels a bit more like smoking a cigarette, you’ll want to use the automatic firing option. Simply puff on the mouthpiece, and it’ll create vapor automatically. One of the fun things about the Uwell Caliburn G is that, since the filling port is on the top, you can actually fill the pod without removing it from the device. To fill the pod, wiggle the plastic mouthpiece gently until it comes loose. The bottom of the pod will stay inside the device. You’ll see the filling port slightly offset from the pod’s center air channel. Place the nozzle of your e-liquid bottle inside the filling hole and squeeze until the pod is almost full, making sure to leave a little room for air at the top. Replace the mouthpiece. If you’re using the Uwell Caliburn G for the first time or have just replaced the coil, let the pod stand for five minutes before vaping. How to Replace the Uwell Caliburn G CoilSince the Caliburn G is a sub-ohm vaping device, it offers a slightly higher operational wattage than the original Caliburn and runs at up to 18 watts. Performance wise mine seems to work really well and I have absolutely no sign of any leaking that some have reported. Maybe there was an issue which has been fixed with a small modification.